Development and critical comparison of greener flow procedures for nitrite determination in natural waters

Two greener procedures for flow-injection spectrophotometric determination of nitrite in natural waters were developed and critically compared. Replacement of toxic reagents, waste minimization and treatment were exploited to attend the standards of clean chemistry. The flow system was designed with solenoid micro-pumps in order to minimize reagent consumption and waste generation. The first procedure is based on the Griess diazo-coupling reaction with sulfanilamide and N-(1-naphthyl)ethylenediamine (NED) yielding an azo dye, followed by photodegradation of the low amount of waste generated based on the photo-Fenton reaction. The second procedure is based on the formation of iodine from nitrite and iodide in acid medium in order to avoid the use of toxic reagents. For Griess method, linear response was achieved up to 1.0 mg L^− 1, described by the equation A = − 0.007 + 0.460C (mg L^− 1), r = 0.999. The detection limit was estimated as 8 μg L^− 1 at the 99.7% confidence level and the coefficient of variation was 0.8% (n = 20). The sampling rate was estimated as 108 determinations per hour. The consumption of the most toxic reagent (NED) is reduced 55-fold and 20-fold in comparison to batch method and flow injection with continuous reagent addition, respectively. A colorless residue was obtained by in-line photodegradation with reduction of 87% of the total organic carbon content. The results obtained for natural water samples were in agreement with those achieved by the reference method at the 95% confidence level. For the nitrite–iodide method, linear response was observed up to 2.0 mg L^− 1, described by the equation A = − 0.024 + 0.148C (mg L^− 1), r = 0.999. The detection limit was estimated as 25 μg L^− 1 at the 99.7% confidence level and the coefficient of variation was 0.6% (n = 20). The sampling rate was estimated as 44 determinations per hour. Despite avoiding the use of toxic reagents, the nitrite–iodide method presented worst performance in terms of selectivity and sensitivity.     

Inorganic-organic hybrids of the p,p′-diphenylmethylenediphosphinate ligand with bivalent metals: a new 2D-layered phenylphosphinate zinc(II) complex

By reaction of Zn(CH₃COO)₂ with p,p′-diphenylmethylenediphosphinic acid in water a new inorganic-organic polymeric hybrid of formula [Zn(CH₂(P(Ph)O₂)₂)] has been synthesized and completely characterized. The X-ray analysis established that the structure consists of 2D-layered polymeric array, the 2D-sheets being built up through strong covalent linkages between the zinc metal and the oxygen donors of the phenylphosphinate ligand. The 2D-layers, which are featuring a mesh-net fashion, present voids of various dimensionality, up to 24-membered rings. The organic parts of the hybrid ligand, namely the phenyl rings, are shielding the inorganic skeleton of the layers, preventing the propagation of the polymer in the third dimension. No water molecules are present in the lattice, both of coordination and crystallization. Crystal data are: monoclinic, P2₁/c, a=11.840(2), b=9.646(9), c=12.516(5) Å, β=95.03(2), V=1423.9(15) Å³, Z=4. The solid material has been characterized by ³¹P MAS NMR spectroscopy and thermogravimetric analysis.     

Passivation of the calcite surface with malonate ion

Samples of polycrystalline calcite were impregnated with solutions of malonic acid of three concentrations (5 x 10(-2), 5 x 10(-3) , and 5 x 10(-4) M) and different pH values (6.00, 7.00, and 8.00). The impregnation was carried out at room temperature to evaluate the adsorption of malonate ion in the calcite surface to optimize the conditions for possible application on limestone and marble in cultural heritage materials. The affinity of the malonate ion was determined through the potentiometric measurement of the surface charge and the corresponding adsorbed amounts by titration, Raman spectroscopy, and small-angle X-ray scattering (SAXS). The results indicate effective adsorption of the malonate ion on the surface at a pH value close to the point of zero charge (pHpzc approximately 8.20) and changes in some surface morphological properties such as the pore shape and the pore size distribution. The presence of a malonate adsorptive layer on calcite generates an interface interaction potential that may influence the reaction and transport mechanisms within the medium.     

A novel microporous copper silicate: Na2Cu2Si4O11.2H2O

The synthesis and structural characterisation of a thermally stable novel three-dimensional microporous copper silicate open-framework are described; the material is capable of undergoing reversible zeolitic water removal without destruction of the framework.     

Synthesis of [1,3]dithiole and spiro[1,3]dithiole thiopyran derivatives of the [1,2]dithiolo[1,4]thiazine ring system

We report the synthesis of some new polysulfur-nitrogen heterocycles by cycloaddition reactions to readily available tricyclic condensed 1,2-dithiole-3-thiones. Thus, treatment of bis[1,2]dithiolopyrrole ketothione 1 with diacyl acetylenes gave the bis-aducts 2a-d. On the other hand, cycloaddition of bis[1,2]dithiolo[1,4]thiazine ketothione 3 with 1 equiv of acyl or diacyl acetylenes gave [1,3]dithiolylidenyl[1,2]dithiolo[1,4]thiazines 4a-f in fair to high yields. Catalysis by scandium triflate was used in the reactions that implied the less reactive dipolarophiles. Treatment of 3 with 2 equiv of DBA gave the bis-aduct 5a, and reaction of 4c with DMAD gave the mixed bis-adduct 5b. Cyclic voltammetry of selected examples showed irreversible processes that were influenced by the electrochemical activity of peripheral groups bonded to the heterocyclic system.     

Theoretical study of ribonucleotide reductase mechanism-based inhibition by 2'-azido-2'-deoxyribonucleoside 5'-diphosphates

2'-azido-2'-deoxyribonucleoside 5'-diphosphates are mechanism-based inhibitors of Ribonucleotide Reductase. Considerable effort has been made to elucidate their mechanism of inhibition, which is still controversial and not fully understood. Previous studies have detected the formation of a radical intermediate when the inhibitors interact with the enzyme, and several authors have proposed possible structures for this radical. We have conducted a theoretical study of the possible reactions involved, which allowed us to identify the structure of the new radical among the several proposals. A new reactional path is also proposed that is the most kinetically favored to yield this radical and ultimately inactivate the enzyme. The energetic involved in this mechanism, both for radical formation and radical decay, as well as the calculated Hyperfine Coupling Constants for the radical intermediate, are in agreement with the correspondent experimental values. This mechanistic alternative is fully coherent with remaining experimental data.     

Evaluation and application of bismuth as an internal standard for the determination of lead in wines by simultaneous electrothermal atomic absorption spectrometry

A method for the direct determination of Pb in wines by simultaneous multi-element atomic absorption spectrometry (SIMAAS) using a transversely heated graphite atomizer, Zeeman-effect background corrector and internal standardization is proposed. Bismuth was used as an internal standard and Pd(NO3)2 plus Mg(NO3)2 as chemical modifier to stabilize both the analyte and the internal standard. The implementation of two pyrolysis steps avoided any build-up of carbonaceous residues on the graphite platform. All diluted samples (1 + 1 v/v) in 0.2% v/v HNO3 and reference solutions (5.0-50 microg l(-1) Pb in 0.2% v/v HNO3) were spiked with 25 microg l(-1) Bi. For a 20 microl aliquot dispensed into the graphite tube, a good correlation (r = 0.9997) was obtained between the ratio of the analyte signal to the internal standard signal and the analyte concentration of the reference solutions. The electrothermal behaviour of Pb and Bi in red, white and rosé wines were compared. In addition, absorbance variations due to changes in experimental conditions, such as atomizer temperature, integration time, injected sample volume, radiation beam intensity, graphite tube surface, dilution and sample composition, were minimized by using Bi as internal standard. Relative standard deviations of measurements based on integrated absorbance varied from 0.1 to 3.4% and from 0.5 to 7.3% (n = 12) with and without internal standard correction, respectively. Good recoveries (91-104%) for Pb spikes were obtained. The characteristic mass was 45 pg Pb and the limit of detection based on integrated absorbance was 0.9 microg l(-1) Pb. Internal standardization increased the lifetime of the tube by 25%. Direct determinations of Pb in wines with and without internal standardization approaches were in agreement at the 95% confidence level. The repeatability and the tube lifetime were improved when using Bi as internal standard. The improvement in accuracy using an internal standard was only observed when the analytical results were affected by errors.     

Highly conjugated p-quinonoid pi-extended tetrathiafulvalene derivatives: a class of highly distorted electron donors

A new class of pi-extended TTF-type electron donors (11 a-c) has been synthesized by Wittig-Horner olefination of bianthrone (9) with 1,3-dithiole phosphonate esters (10 a-c). In cyclic voltammetry experiments, donors 11 a-c reveal a single, electrochemically irreversible oxidation-yielding the corresponding dicationic products-at relatively low oxidation potentials (approximately 0.7-0.8 V). Theoretical calculations, performed at the DFT level (B3 P86/6-31 G*), predict a highly-folded C(2h) structure for 11 a. In the ground state, the molecule adopts a double saddle-like conformation to compensate the steric hindrance. The calculations suggest that the intramolecular charge transfer associated with the HOMO-->LUMO transition is responsible for an absorption band observed above 400 nm. While the radical cation 11 a*+ retains the folded C(2h) structure predicted for the neutral molecule as the most stable conformation, the dication 11 a(2+) has a fully aromatic D(2) structure, formed by an orthogonal 9,9'-bianthryl central unit to which two singly-charged dithiole rings are attached. The drastic conformational changes that compounds 11 undergo upon oxidation account for their electrochemical properties. By means of pulse radiolysis measurements, radical-induced one-electron oxidation of 11 a-c was shown to lead to the radical cation species (11 a-c*+), which were found to disproportionate with generation of the respective dication species (11 a-c(2+)) and the neutral molecules (11 a-c).     

Methodology for rapid tritium determination in urine

Summary The present work proposes a methodology for a rapid determina-tion of the tritium content in urine. The urine is treated with active carbon and tritium is determined by liquid scintillation counting. Different kinds of active carbon were experimented for the metabolites removal from urine samples. The counting efficiency was calculated by a quench curve using yellow food dye as a quenching agent. It was obtained a procedure which maintained a good reproducibility, low uncertainty and detection limit of 7 Bq/l (10 ml of urine, 120 minutes of counting time and efficiency of 23.9%).     

BRCA1 mutation screening using restriction endonuclease fingerprinting-single-strand conformation polymorphism in an automated capillary electrophoresis system

Efficient mutation scanning techniques are needed for the rapid detection of novel disease-associated mutations and rare-sequence variants of putative importance. The large size of the breast cancer 1 gene (BRCA1) and the many mutations found throughout its entire coding sequence make screening for mutations in this gene particularly challenging. We have developed a method for screening exon 11 of the BRCA1 gene based on restriction enzyme digestion of fluorescence-labeled polymerase chain reaction (PCR) products followed by single-strand conformation polymorphism (SSCP) using an automated capillary electrophoresis system, denoted capillary restriction endonuclease fingerprinting (REF)-SSCP electrophoresis. Using this strategy on a control set of samples, we were able to detect 17 of 18 known sequence alterations. The method was then applied to screen 73 Norwegian females with family histories of breast and/or ovarian cancer. A total of 172 sequence alterations were detected, including substitutions, insertions, and deletions. One novel substitution of unknown function was identified. Sequencing of all samples negative in the capillary REF-SSCP system gave no additional mutations confirming the high sensitivity of the described methodology. Capillary REF-SSCP electrophoresis appeared as a technically convenient technique, requiring amplification of fewer PCR fragments than traditional SSCP. The novel strategy allows high-throughput mutation scanning without radioactive labeling and polyacrylamide gel electrophoresis (PAGE).